Solid Blockboard Core Doors

Solid Blockboard Core Doors

Nordex manufactures Solid Blockboard Core doors.
Blockboard is made up from kiln dried timber strips laminated together to form a solid panel which is then sheeted to both faces with specified door skins (Enduraboard, MDF, Plywood).
These can have a decorative face veneer or HPL face if required.
To minimize the problem with show-through, Nordex uses 6mm thick door skins and employs a cold press system when pressing the skins to the blockboard core. This is done to minimize the disturbance of the moisture content in the timber, compared to when a hot press process is employed.
Standard thicknesses are 35mm, 40mm and 44mm

Nordex stock the following blanks in 35mm & 40mm;

  • 2100 x 900 & 1200mm
  • 2400 x 900 & 1200mm
  • 2700 x 900 & 1200mm

Other sizes and thicknesses can be manufactured on request:
Oversized internal doors up to 3000x1800mm or 3600x1200mm.
Oversized external doors up to 3000x1500mm.
Internal doors wider than 1800mm can be supplied in parts ready for assembly on site by the customer.

Nordex can supply doors:

  • As blanks.
  • Cut to size.
  • Timber edged.
  • Timber veneered.
  • HPL (high pressure laminates).
  • Metal clad.

We can provide these doors with provision (cut outs) for hardware (locks, pivot mechanism, flush-bolts, seals, closers, grilles, etc.) and glazed viewing panels.

G
Machining Service Gallery page (3)
Solid blockboard door page (5)